ASE Heated Filter Selector Wizard

Please provide the following contact information:

First Name
Last Name
Organization
Work Phone
Other Phone
FAX
E-mail

• Please select the filtration application that is closest to your need.

  Select Filtration Application Diesel Testing (Heavy Particulate) Stack Testing (Heavy Particulate) Incenerator Testing (Heavy Particulate) Mobile Lab (Heavy Particulate) Automotive/Gasoline Testing (Medium Particulate) Mobile Lab (Medium Particulate) Process Monitoring (Medium Particulate) Natural Gas Testing (Light Particulate, Moist) Light Alternate Fuels/Gas (Light Particulate, Moist) Other
  

  Please select the PRIME criteria that will give you the best filtration solution for your needs.
  
  Low Volume/Quick Response    High Volume/Longer Filter Life    High Moisture Content    Dry Sample

  Hot Sample (250 C +)        Exposed to Weather      Laminar/Not-Turbulent Flow

  Easy/Frequent Element Changes        Robust Design    Extreme Vibration 

  This is my ONLY sample filter  I have course filtration upstream   I have fine filtration downstream

  High Sample Pressure    Incorporated Valves for Sample Selection/Calibration

• Select an Operating Temperature:

  Select a Filter Operating Temp 500 C 300 C 225 C 200 C 191 C 180 C 150 C 100 C or less
  

• Click on Compounds to be measured

• TCH    NOX    SOX    O2    CO    CO2    Ammonia    N2    Particulate

       Specific Gases or compounds

Please enter any relevant compounds and their concentrations here as it relates to filtration

• Select an Incoming Sample Temperature:

  Select an Incoming Sample Temp 500 C 300 C 250 C 200 C 100 C or less
  

• Select an Operating Voltage

  Select a Heater Voltage 480 VAC 240 VAC 200 VAC 120 VAC 100 VAC 48 VAC 24 VDC 12 VDC
  

• Select your filter housing material. This is the housing that holds the filter element. It will be exposed
  to your exhaust/sample.

  Select a Filter Body Stainless Steel Electro-Polished SS Sulphinert-Coated SS Silco-Steel Coated SS Teflon Don't Know  

• Where will you be using your Heated Filter?

  Select an Area of Use Indoors/Dyno/Lab Outdoors/Cold/Wet/Stack Indoors/Cold/Dry NEMA 4 Rating Req'd High Temperature Area On-Road Use/Windy Classified Area

• Select a Port Size

Select a Port Size 1/16" 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 1mm 2mm 3mm 4mm 5mm 6mm 8mm 10MM 12mm 16mm 20mm Over 20mm, contact ASE


• Select a Port Type

  Select a Port Type Swage/Compression Tube Stub ISO - Male ISO - Female NPT - Female NPT - Male JIC - Male JIC - Female BSPS - Male BSPS - Female BSPT - Male BSPT - Female

• Select a Temperature Sensor:

  Select a Sensor J-T/C K-T/C T-T/C S-T/C E-T/C PT100 RTD Self Limiting Internal Thermostat
  

• If you selected a Classified Area, please give us more details:

  If needed, select a Chassification Class 1 Div 1 Grp A Class 1 Div 1 Grp B Class 1 Div 1 Grp C Class 1 Div 1 Grp D Class 1 Div 2 Grp A Class 1 Div 2 Grp B Class 1 Div 2 Grp C Class 1 Div 2 Grp D Class 2 Div 2 Grp A Class 2 Div 2 Grp B Class 2 Div 2 Grp C Class 2 Div 2 Grp D
  

• Additional Options

Enter any options, additional descriptions or special request here

 

• Describe Your Application

  
  

---

Author information goes here.
Copyright © 2001 [Atmo-Seal, Inc.]. All rights reserved.
Revised: October 13, 2010