|
Heated
Filter/Valves
Atmo-Seal
Engineering, Inc. manufactures custom heated components
for use in gas and diesel sampling; stack and process
monitoring, dispense, freeze protection and other area
required by our customers, We also combine
components, manifolds, pumps, filters and prefabricated
tubes into specific heated devices which fit your exact
needs. And all Atmo-Seal components easily interface
with our heated sample lines.
Pictured below
are a few examples of our custom-heaters and components.
Heated
Bayonet-Type Filter and Solenoid Assembly
- Choice of
AC 50-60 HZ or DC operation
in a wide range of voltages
- Choice of Thermocouple, RTD, Internal
Thermostat or other sensors
- Choice of valve configuration (2 way/3 way)
- Solenoids may be located up- or down-
stream of the filter
- Housings are available for common filter
sizes (1 X 7, 1 X 2.5, 1/2 x 2.25,
1/2 x 1")
- Easily dis-assembled and repaired in situ if needed
- Filter element may be changed easily by the user
Click
here for Filter/Valve PDF
The Solenoid Valve and Filter Units are just one example
of how a specific customer need has lead to a standard
product. Uses include multiple sample selection, leak
checking, purging and introduction of calibration gases.
They are custom made to your specifications and will
route and filter your sample gas exactly as needed for
your application...Just call us!
Problem
Solvers....
Atmo-Seal, Inc. is a "think
tank" company. We use our expertise to create
high-quality, cost-effective components and systems to
solve your sampling and dispensing needs.
Heated ball valve and
filter combination pictured above. The ball valve
is completely serviceable by simply removing the heated
sleeve shown in figure 2. Available in either
single temperature zone or dual temperature zone
configurations.
Options
As always, Atmo-Seal, Inc., will
customize your filters to your exacting specifications
WITHOUT jeopardizing your delivery schedule.
|
