Heated
Probes
Atmo-Seal
Engineering, Inc. manufactures heated sample extraction
probes for use in gas and diesel sampling; stack testing
and process monitoring. Our heated probes heat your
sample and keep it hot to eliminate condensation or
hydrocarbon hang-up. Our typical operating range is up
to 500 F, but higher temps are available for more
extreme applications.
Gaseous
Sampling and Particulate Probes
Click
here for PDF
Heated
Particulate Probe
 ALL
ATMO-SEAL HEATED PROBES FEATURE:
Choice
of AC 50-60 HZ or DC operation in a wide range of
voltages
Choice of Thermocouple, RTD, Internal Thermostat or
other sensors- Optional Internal Calibration gas/span tubes
All SS or Teflon construction per your specifications --
Your choice of mounting configurations, NPT, Flange, ISO
thread or others
Dual
Stream Sample Probe with
Integrated Sample/Cal
Manifold
 
Heated
HC/ NOX Probe with Exit Filter
At Atmo-Seal, Inc., we know the
life of an emissions probe is a dirty one. Our probes
are made from the highest quality stainless steel, both
inside and out. Our probes may be electro-polished and
are designed for both gaseous and particulate sampling;
method five sampling and standard stack & CEM
applications.
We also offer
probes designed with all Teflon wetted parts for the
most corrosive conditions.
Mounting may be
from a bolt on flange, sanitary flange, NPT or ISO
threads. The mounting flange may be either fixed or
adjustable, allowing for differing tunnel diameters and
engagements.
Our heated probes carry a full 18 month limited
warranty, too!
Options
Popular
options include an integrated calibration gas tube; your
choice of mounting configurations; multiple sample
tubes, straight, 45 degree or 90 degree bends and of
course, voltage, temperature, media and sensor types.
All of our heated products interface easily with our
heated sample lines.
|
